BROCHURE Download our brochure
CLEARANCE CLEARANCE our offer
PAYMENT PAY online
seek below for bargains, clearances sales of over production, special items, unusual products, etc...
and use the opportinity of stock Items to get immediate delivery
batch of 40 m² cl 3 treated Douglas decking
curved top, smooth profile
Mix lengths from 0.80 to 3.0 m
Batch of 65 m² of Solid Oak flooring, to nail
boards of 400 to 800 mm with T&G
no finish
Solid oak flooring to nail
AB grade (small knots) with sap wood => requires fugal and insecticide treatment before installation
section of the boards : 22x90 or 22x120 mm
random lengths 400-1600 mm (T&G)
Quantity available 160 m² in 22x90 - 100 m² in 22x120
requires fugal and insecticide treatment before installation
Pointed stakes
Air dried, possible sapwood, NOT treated
section 38x38 mm, length 2.20 m
pointed 2 faces -
for boundary marking or as plant stake
Rough sawn pieces
Should be treated for durable external use
Un edgeg rough board, sawn faces, for manufacturing of table or worktop, with "natural edges"
Assortment limited to available boards, in exisiting sizes
no possibiliies to plane or to cut to size on site.
Solid edge glued panels white ash
made of 20x40 mm finger jointed lamellas (comb joint not visible on face)
size40 x 900 x3000 mm (not calibrated)
for interior fitting like table or worktops, side panels and shelves for wardrobes or cabinets...
Availability of about 20 panels
to be used indoor only
Frame wood, laminated, 2 ply, finger jointed
PAR 45x68 mm finish section, 4 m length
With sapwood, treated Cl 4, brown colour
tu be used as joist or batten
Special discount for bundles of 180 pieces
Rough sawn boards of treated Douglas, brown, class 3
section 32x150, lengths of 2.50 et 3.0 m
Rough sawn timber suitable for fencing and cladding,
Douglas decking boards,(treated Cl 3, green)
section 27x145 mm, grooved top, with flat stripe in the middle
Lengths 3.50 to 4.9 m
Douglas is naturally class of use 3, (excluding sapwood, to be treated for durability)
Joist connector made of 2 mm galvanized steel
dimensions (w x h x d) 100 x 200 x 75 mm
6 bolt holes diam 12 mm (for 10 mm nuts mini)
hole for diam 4 mm nails (square twisted nails)
about 70 pieces available
Panelling in finger jointed Mapple / Sycamore
Gross section 20x90 mm, in 3 m length,
Profile with staight rabbet and 5 mm channel, on top, net width of 80 mm
Smooth back face
white timber to paint or varnish
Mapple / Sycamore boules
volumes in 27 mm AB grade
and in 34 mm, A grade
some availability in 36 and 41 mm
list on request
bundles of rustic oak, square edged, random width
majority of wide boards (160 mm +)
Pippy oak boules, nice grade, asked for furniture and decoration
Cover board for partition edge sections
45x90 (for 70 mm partition) and
45x70 (for 50 mm partition)
lenghts of 2.60 - 2.70 m
Cedar of Lebanon / Atlas joists
Dry timber, not treated naturally class 3 excluding sap wood (french chart)
suitable for every kind of building works
Pointed machined stakes
to fasten edging or for boundery marking
1 pallet of 174 pieces available
Pine corner moulding, finger jointed, to paint
about 25 bundles of 50 pieces available
Finger jointed pine batten, to paint
37 bundles available
Douglas joists, rough sawn
solid, not treated for any construction, sustainement, formwork
to be treated for durable use outdoor due to the sapwood
45x140x 2.40 m
40 pieces available
Various batches of solid decking boards in durable and naturally sustainable hardwoods
thicknesses 20 to 22 mm
Batches of 1 to 15 m², to be collected on site
for retrofit, refurbishment, or small surfaces like gangways,garden bridges, shed floor, various DIY projects...
Contact us for details
Poplar board for traditional Breton puck game
official required size of 30 x700x700 mm
novel design with no border on top avoiding bad bounce of the puck
sold without the cast iron pucks (available with more cost)
zinc coated decking fixture (with screws 5x17) for decking timber boards up to 28 mm thick and 100 to 150 mm width.
To be fitted at the back of the board before installation.
allowing good ventilation and drying by creating a space between the boards and the joists
one blade needed per leaning point, so about 18-20 blades per m² (screw of 5x30 not included)
Finger jointed boards, in sweet chestnut, to be molded as cladding or decking board.
minimum quantity 30 m². Lengths of the boards on demand, from 2,0 to 5,0 m
we can machine the boards if needed for a smooth, clean finish
Finish sawn/glued. or machined
On request, we can make the profile, according our wide range (overlapping or open jointed)
Bin enclosure, 4 sides made of finger jointed boards with overlapping
dimensions 190 wd x 90 dpt x 127 hgt
one double and one single door on the front
suitable for 3 standard bin containers
AD Oak planking boards
36x140 mm, with slighdtly curved top, (1.5 mm)
anti slip resin inlay (3x16 mm) on top
random lengths of 0.70 to 2.70 m
Prefabricated cladding panels in Sweet Chestnut timber
made of 40x60 mm bevelled boards screwed on a frame of 20 x 40 mm
height : 125 cm, widths of 40, and 60 cm
to be uses as privacy screen, or fencing panel as well.
About 100 m² available totally (all widths)
Naturally durable timber, especially for outdoor jobs
Privacy screen panel in Larch timber, 40x 125 cm
made of 40x60 mm bevelled boards screwed on a frame of 20 x 40 mm
About 10 pieces available
Machined Chestnut round handrail diam 80 mm (can be used as stake as well)
Naturally durable, without treatment
15 pieces available
can also be used for edging or as retaining structure
Pine boards, graded AB, (knotty but no other major deffect)
purposes of use : flooring, panelling, decoration, joinery, interior fitting only as not treated.
for outdoor, for nont durable works excepted if shelted, formworks etc...
Finger jointed boards, in Robinia (false acacia), to be molded as cladding or decking board.
minimum quantity 15 m3. Lengths of the boards on demand, from 2,0 to 5,0 m
Finish sawn/glued.
On request, we can make the profile, according our wide range (T&G or open jointed)
Sweet chestnut shortcuts, air dried, to be finger jointed for production of cladding for instance
On request, we can finger joint this shortcuts and deliver sawn/glued boards up to 5.0 m
cut to104/118/132 x 34 mm
additional shortcuts fresh sawn / seasoned, available to be kilned on demand for more volume
KD square edges, but not heated (no thermal modification)
Above 5 years air dried oak boule
Oak boules graded QB3, about 2-3 years air dried
dedicated to restauration works - grade comparable to QP1 beams
10% of the boules have length between 3.0 and 4.0 m
un edged boards of lime in 65 mm thickness, mostly 3.0 m long
white timber, suitable for joinery purposes
Chestnut batten
Steamed and kiln dried oak selected boules of AB graded french walnut
majority in thicknesses of 80 to 100 mm and width of 80 to 120 mm
sold in "random sections" packs
Those sleepers aren't treated
